How To Clean Tile Floors: Stone, Ceramic, Vinyl And More

How To Clean Tile Floors: Stone, Ceramic, Vinyl And More

Maintaining a clean home is important to keep on top of. Whether you find it easy to tackle as you go on a daily basis or like doing a deep clean on the weekends, there’s nothing like seeing a home that was merely a few hours before, in disarray, now tidy and clean.

When it comes to cleaning parts of the home, it’s good to use a range of products and methods to find what works the best for your home’s interiors. Here are some great tips on how to clean tile floors.

Stone Tile Floors

With stone floors it’s important to figure out what type of natural stone the tile is made out of before you start putting any type of product down onto it. Putting down the wrong chemicals or floor cleaner could result in you damaging the stone if you’re not careful. Calcareous stones are types like marble and limestone.

These can be very sensitive when exposed to harsh chemicals. Siliceous tiles can refer to granite or slate, and with both, you might want to consider using the relevant sealants needed. The first thing you want to do is wipe up any spillages as soon as possible.

Get a formulated cleaner that works alongside any sealant you’ve used and keep up with cleaning your stone tiles every few weeks. With stone tiles, it’s important to know what type of stone it is and then to find the best cleaners that can help.

Kneeling over to clean your tiles can be hurtful on your knees so try getting some knee pads to help when it comes to getting on the floor and drying the tiles. If you don’t have the ability to get down to floor level, then it’s always a good idea to use a mop with a microfiber cloth attached to it.

Ceramic and Porcelain Tile Floors

These types of tiles are extremely durable, and so you’re likely to have them last a lot longer than other types of tiles. Firstly, clean up any loose debris with a vacuum or brush pan and brush. This will help maintain any surface damage and keep the tiles looking like new. Find the right floor mop and clean with a mild detergent.

Look out for tile stains and when you find them, identify what’s caused the stain so that you can find a suitable solution to remove it.

When drying your tiles, it’s important not to simply let them air dry but instead use a clean microfiber cloth to clean them dry. Microfiber cloths are great at picking up any extra dirt but to also ensure you’re not rubbing any dirt and debris onto your freshly cleaned tiles.

When it comes to using a mild detergent or washing up liquid with the water, try to avoid using too much of it. You want to clean the tiles without leaving behind a soapy residue.

This can end up stopping your tiles from shining, which is the end result you want when you’ve spent all that effort and time in cleaning them. If you see a lot of soap residue, then it’s worth emptying out your mixture of detergent and water and starting again.

Clean Resilient Tile Floors

Resilient tile floors are mostly defined by those made from vinyl, cork or linoleum. They’re the types of tiles that are often a lot more affordable to purchase, but that doesn’t mean they can’t look good. They are less durable than harder tiles, but the softness of resilient ones can make them more comfortable on your feet. 

Start off by removing any debris with a broom or vacuum. Be careful with how much pressure you apply when removing the dirt and try to be as light-handed as possible. Find out what type of resilient tile you have and where it’s come from.

You can always check with that supplier what cleaner is best used, but a non-abrasive all-purpose cleaner will likely do the job. Some of these products will be no-rinse, while others will need to be rinsed off. It’s up to you which ones you choose to help make it an easier process or one that requires a bit more effort.

Moisture can end up being quite harmful to these tiles because it warms the tile and can lift it from the floor itself. This ruins the look and feel of the tiles so you might want to skip using any steam mops or anything that involves an excessive amount of water.

The rule of wiping up spillages as quickly as you can is a number one rule for resilient tiles. They’re not as water-resistant as other types of tiles, so when the spillage happens, get on it quickly.

Cleaning Grout & Regrouting

Grout is something that often goes between tiles on your flooring to keep them in place. The grout is typically white, and although this is aesthetically pleasing, it does tend to yellow or become dirty over time. With that being said this solution below is a good one to use.

Baking Soda & Vinegar – A great combination that’s worth doing to help lift any stains on the grout itself. Mix one part water with three parts baking soda in order to make a paste. Apply this paste directly onto the grout and ensure it’s covering it completely. Apply this with your fingers and then spray the paste with a water and vinegar combination.

You should immediately see a bubbling reaction happening, which means it’s started the cleaning process. Make sure you don’t use vinegar if it’s a stone tile.

For regrouting, it’s something you would only need to do rarely, so be sure to check out resources that can be found online to help replace old grout properly. You could always bring in a professional to do it for you if you’re not feeling that confident.

Cleaning your tile floors are important because they’re a heavily used part of your home that can be prone to dirt and grime. Hopefully, these tips will help keep it pristine clean at all times.

Leave a Reply